36V Ebike Battery 8AH, 36Volt Lithium Ion Electric Bike Battery, Electric Bicycle Motor with Charger, for 200W – 500W

Product Description

Electric Bike/Scooter Battery Usage Guide

Compatibility Guidelines

1. Voltage Specifications

– 36V batteries work only with 36V motors (not compatible with 48V systems)

– 48V batteries are exclusively compatible with 48V motor systems (not compatible with 36V systems)

– 52V systems: Requires smart controller supporting 48-52V range

2. Power Requirements

Verify your motor’s wattage rating matches the battery specifications. Incompatible power demands will result in suboptimal performance.

3. Physical Dimensions

Confirm battery dimensions match your vehicle’s compartment before purchase. Returns for sizing issues are buyer’s responsibility.

4. Connection System

This battery features an XT60 connector. Incompatible plug types will prevent proper operation.

5. Pre-Purchase Verification

Thoroughly review product specifications in the item description before ordering.

Troubleshooting: Charging Issues

If experiencing charging difficulties:

1. Verify charger connections are secure and properly aligned

2. Check for reversed polarity (+/- orientation)

3. Inspect for external short circuits

4. Reset protection board by disconnecting/reconnecting load

5. Test with alternative charger (same specifications)

Charging Protocol

1. Use manufacturer-provided charger or a fully compatible charger

2. Initial Charge: Complete full charge cycle for optimal activation

3. Connection Sequence: Attach battery before powering charger

4. Temperature Management:

– Avoid charging in environments exceeding 149°F (65°C)

– Summer charging: Limit to 90-95% capacity

5. Spark Prevention: Maintain clean, dry contacts

Battery Maintenance

1. Charging Practices:

– No activation required (no memory effect)

– Charge frequently; avoid complete discharges

2. Storage:

– Disconnect from vehicle during extended non-use

– Maintain 50% charge for storage

– Replenish every 2-3 months

3. Load Management:

– Never exceed rated capacity

– Use pedal assist on inclines >10% grade

Safety Requirements

1. Weather Protection:

– Seal connectors during precipitation

– Avoid water immersion

2. Storage Conditions:

– Dry, climate-controlled environment

– Minimum 3ft clearance from ignition sources

3. Usage Prohibitions:

– Never modify battery components

– Strictly prohibit:

* >24hr continuous charging

* Extended dormancy (>6 months)

* Charging near combustibles

4. Thermal Safety:

– Monitor for abnormal heat during charging

– Immediately disconnect if swelling occurs

Compliance with these guidelines ensures:

– Optimal battery performance

– Extended service life (3-5 year typical)

– Maintenance during the validity period

– Enhanced operational safety

Technical Note: All systems include built-in protection against overcharge/over-discharge. Contact certified technicians for any physical damage observations.

HIGH CAPACITY – FoteGlewaBi 36V Lithium-ion Ebike battery has a capacity of 8,000mAH and is suitable for 200W-500W motors.
LONG SERVICE LIFE – The Lithium-ion battery is characterised by long cycle life, high safety and environmental protection, with a service life of more than 1,000 cycles.
SAFE TO USE – Our Lithium-ion battery built-in modular BMS protection board, which can protect the battery from overcharge, overdischarge, overvoltage, overcurrent, short circuit, has more stable performance.
MULTIPLE USES – Our Lithium-ion 36V Ebike Battery can compatible with ebike, electric scooter, electric motorcycle, electric tricycle, solar panel etc.
QUALITY & SERVICE – FoteGlewaBi 36V Lithium-ion battery is professionally designed and tested. If you have any issues about our product, please feel free to contact us for a quick solution.